Circutek AC300
An acid solution formulated specifically to remove the chromate coating from copper-clad laminate prior to innerlayer cleaning and imaging, on oxide lines or in applications where the chromate coating must be removed prior to microetching.
Download Data Sheets
Related products
-
Circutek C-777
Low acid activator system used to catalyze non-metallic surfaces for the subsequent metallization by electroless copper. CIRCUTEK C-777is primarily used in the fabrication of printed circuit boards but can also be used in any application where the metallization of a non-conductor is desired.A pre-dip solution is necessary to pre condition the substrate and to minimize drag-in of water into the CIRCUTEK C-777. Make up the pre-dip solution according to instructions below, or use CIRCUITEK PD-776 liquid.CIRCUTEK PD-776Sis also used in the preparation of CIRCUTEK C-777.
-
Developer Defoamer™
Developer Defoamer is a fully organic, non-silicone,water soluble defoamer that rinses readily and leaves no residue. It is designed for systems where clean rinsing is essentialand it works at any pH. It is odor-free and biodegradable.
-
Sodium Persulfate
SODIUM PERSULFATE
