Feedback is ink that breaks down and circulates back into the water pans and or dampening slips
| Cause | Cure |
|---|---|
| Improper solution mix | Check pH/conductivity |
| Central mixing system settings faulty, system mix not correct | Check settings and adjust as necessary |
| Contaminated rollers | Clean and desensitize |
| Ink/Water balance not correct | See procedures on correct ink/water balance |
| Roller settings incorrect | Check settings and adjust as necessary |
| Rollers to soft or to hard | Check durometer and replace with correct roller |
| Contamination in recirculation tank | Drain and clean. Replace filters and refill with fresh mix |