ElectroPolish 5000™
ElectroPolish 5000 is designed for electropolishing stainless steel. It is an aqueous mixture of strong acids, which allows higher electropolishing currents (amperages) at reasonable voltages.
ElectroPolish 5000 is designed for electropolishing stainless steel. It is an aqueous mixture of strong acids, which allows higher electropolishing currents (amperages) at reasonable voltages.
ChemPolish RL (RDZ-1934) is an acidic bath used for cleaning, polishing and passivating 300 series (austenitic) stainless steel to render it suitable for use in extreme environments such as high vacuum, medical and aerospace applications. The surface is cleaned completely of any organic contamination and is free of soluble inorganic residues. ChemPolish RL (RDZ-1934) leaves a clean finish, free of etching, hydrogen embrittlement or halide induced stress cracking.
ChemPolish Ti6Al4V is formulated to deoxidize and chemically polish titanium grade 5 and other high Ti alloys. Depending on an incoming surface condition the degree of polishing obtained with this product may be sufficient or a good step before electropolishing.
ChemPolish Ti6Al4V will remove base metal very slowly. If a more aggressive chemistry is desired, treat initially with MicroPolish II (RDZ2059 (available from RBP), then treat with ChemPolish Ti6Al4V.
ElectroPolish NF is a room temperature electropolish for titanium and titanium alloys including Nitinol. It is a non-aqueous acidic solution characterized by a relatively poor conductivity.
Looking to outsource your chemical manufacturing or blending? Catch up on latest webinar.
|