Magnum™ N-599
A neutralizer for oxidizer residue left on the hole wall following the permanganate desmear/etchback process. MAGNUM N-599 is used following treatment with MAGNUM K-OXIDIXER or MAGNUM N-OXIDIZER. MAGNUM GE-600 glass etch can be added to the solution to etch back the protruding glass bundles.
Download Data Sheets
Related products
-
FoamFREE™ One
A silicone free, non-solvent based aqueous antifoam for primary image developers and strippers and solder mask developers. FoamFREE™ONE suppresses foaming at very low usage without leaving residue behind or in the machine. FoamFREE™ONE is for any manufacturer who needs to reduce antifoam usage to reduce process costs without the use of solvents
-
Layer Clean™ NP
An acid, non-etching cleaner that provides the most effective removal of chromate conversion coating from copper laminate. LAYER CLEAN NP also removes soils such as fingerprints and oxides. Used prior to photoresist lamination, it reduces imaging defects by improving photoresist adhesion. LAYER CLEAN NP’s non-chelating, non-chloride, phosphate free formula cleans and conditions copper surfaces, and provides consistent high speed cleaning at low concentrations. It is effective in both spray and soak applications.
-
Cupric Etching Equipment Cleaner
Provides an effective clean out of Cupric Etcher sumps along with manual removal of deposits on the etch chamber walls. CUPRIC ETCH EQUIPMENT CLEANER will dissolve Dry Film deposits built up between PM’s. CUPRIC ETCH EQUIPMENT CLEANER has a low VOC content for reduced air emissions.
