Screensol™ SC-560N
An economical, non-flammable screen wash formulated to remove solvent processible inks from printed circuits screens and boards without leaving residue.
Download Data Sheets
Related products
-
DX™ Strip BAT
Provides additional antitarnish protection while removing fully aqueous liquid photoresists in spray or soak applications. DX STRIP BAT is also effective on aqueous dry film photoresists, and on a combination of liquid and dry film resists being stripped in the same process. It will generally break dry films into particles suitable for filtration. DX STRIP BAT has a low VOC content for reduced air emissions.
-
DX™45 Plus
A one-part concentrate formulated to develop fully aqueous dry film photoresists and photoimageable solder masks. DX-45 PLUS’ highly concentrated formula is ideally suited for use in feed and bleed systems, resulting in less frequent additions than with more dilute carbonate solutions. Proprietary ingredients enhance loading, help keep equipment clean, and ensure straighter sidewalls, cleaning the foot” of underdeveloped resist. These features result in greater productivity and less down time. “” one-part concentrate formulated to develop fully aqueous dry film photoresists and photoimageable”
-
Layer Clean™ NP
An acid, non-etching cleaner that provides the most effective removal of chromate conversion coating from copper laminate. LAYER CLEAN NP also removes soils such as fingerprints and oxides. Used prior to photoresist lamination, it reduces imaging defects by improving photoresist adhesion. LAYER CLEAN NP’s non-chelating, non-chloride, phosphate free formula cleans and conditions copper surfaces, and provides consistent high speed cleaning at low concentrations. It is effective in both spray and soak applications.
