VersaClean
VersaClean is formulated to clean multiple metallic surfaces including aluminum, copper, Sn/Pb solder (HASL), Pb-free solder, and ENIG. It is characterized by very good detergency while exhibiting no corrosion of these surfaces.
Download Data Sheets
Related products
-
Posiclean™ M
An acid soak cleaner that removes oxidation, tarnish and organic soils from copper surfaces. POSICLEAN M is formulated to clean effectively in a variety of applications such as pre-clean prior to copper pattern plate, prior to dry film lamination, prior to oxide process, and as a pre-clean for tin or tin/lead electroplating. POSICLEAN M can be followed by a microetch when necessary for increased adhesion.
-
Cupric Etching Equipment Cleaner
Provides an effective clean out of Cupric Etcher sumps along with manual removal of deposits on the etch chamber walls. CUPRIC ETCH EQUIPMENT CLEANER will dissolve Dry Film deposits built up between PM’s. CUPRIC ETCH EQUIPMENT CLEANER has a low VOC content for reduced air emissions.
-
Layer Clean™ CR
An acid, non-etching cleaner that provides the most effective removal of chromate conversion coating from copper laminate. LAYER CLEAN CR also removes soils such as fingerprints and oxides. Used prior to photoresist lamination, it reduces imaging defects by improving photoresist adhesion. LAYER CLEAN CR’s non-chelating, non-chloride formula cleans and conditions copper surfaces, and provides consistent high speed cleaning at low concentrations. It is effective in both spray and soak applications.
