MicroClean™ BS
MicroClean BS is a deoxidizer formulated for titanium alloys including Nitinol. It is characterized by moderate aggressiveness, which makes is a good choice for removal of more robust oxides.
MicroClean BS is a deoxidizer formulated for titanium alloys including Nitinol. It is characterized by moderate aggressiveness, which makes is a good choice for removal of more robust oxides.
CoCr ElectroPolish is designed for electropolishing Co-Cr alloys used in medical device manufacturing. It is a relatively mild acidic blend containing an organic solvent. The solution allows good efficiency of electropolishing at reasonable currents (amperages) and voltages.
ChemPolish Ti6Al4V is formulated to deoxidize and chemically polish titanium grade 5 and other high Ti alloys. Depending on an incoming surface condition the degree of polishing obtained with this product may be sufficient or a good step before electropolishing.
ChemPolish Ti6Al4V will remove base metal very slowly. If a more aggressive chemistry is desired, treat initially with MicroPolish II (RDZ2059 (available from RBP), then treat with ChemPolish Ti6Al4V.
MicroPolish and MicroPolish II are two inhibited deoxidizers formulated for titanium and titanium alloys including Nitinol. Each product acts as a cleaner/deoxidizer and slow chemical polish effective in removing surface metal oxides but only slowly etching base metals. Of the two polishes, MicroPolish is slightly more aggressive. Overall, the etch rates are low for both polishes when compared to traditional deoxidizing chemistries. They are particularly suitable for applications where avoiding dimensional and weight losses is of critical importance (for example in devices utilizing fine wires).
Looking to outsource your chemical manufacturing or blending? Catch up on latest webinar.
|