Solder Conditioner 417
An acid tin/lead cleaner designed to remove salt residues that remain after alkaline etching. The removal of these salts is essential to ensuring good fusing and a bright finished solder surface. SOLDER CONDITIONER 417is effective at eliminating re-deposition of tin on copper surfaces and allows re-etching of panels, thus minimizing rejects. Effective for both soak and spray applications. SOLDER CONDITIONER 417is an excellent pre-cleaner priorto fusing for eliminating oxides and enhancing solder edge coverage on circuits.
Download Data Sheets
Related products
-
DX™45 NH
A liquid 45% potassium carbonate concentrate formulated to develop fully aqueous dry film photoresists and photoimageable solder masks. DX-45 NH contains a unique blend of ingredients to ensure straight sidewalls and will help clean the foot” of underdeveloped polymer. These same ingredients help keep the equipment clean
-
DPC-20 Screen Cleaner™
A safe solvent based material for the removal of uncured printing inks and solder masks. It contains no chlorinated hydrocarbons and no flammable solvents. DPC-20 SCREEN CLEANER is fast acting and has high holding capacity for economy and higher productivity.
-
DX™45 Plus
A one-part concentrate formulated to develop fully aqueous dry film photoresists and photoimageable solder masks. DX-45 PLUS’ highly concentrated formula is ideally suited for use in feed and bleed systems, resulting in less frequent additions than with more dilute carbonate solutions. Proprietary ingredients enhance loading, help keep equipment clean, and ensure straighter sidewalls, cleaning the foot” of underdeveloped resist. These features result in greater productivity and less down time. “” one-part concentrate formulated to develop fully aqueous dry film photoresists and photoimageable”
