Circutek PC-801
A high speed, electroless copper process which is capable of depositing 80 -100 millionths of copper in 30 minutes. CIRCUTEK PC-801 deposits a dense, adherent copper film on catalyzed surfaces for the production of printed circuitboards.The solution is easy to control and has a broad operating temperature range. The copper produced is a bright pink, fine-grained deposit, which is readily receptive to subsequent copper electrodeposition.
Download Data Sheets
Related products
-
LevelCote™ Flux 350
LEVELCOTE FLUX 350 is a unique blend of ingredients formulated for use in a horizontal hot air leveling process. It will remove light copper oxides and lays down a protective layer of flux to protect solder mask, and promote good solderability of copper pads. LEVELCOTE FLUX 350 will provide a bright uniform solder finish with good rinseability. LEVELCOTE FLUX 350 is non-foaming and compatible with LPI and dry film solder masks.
-
MagnaBond™ CO-300
A copper oxide process uniquely formulated to produce a variety of oxide coatings ranging from a very fine-grained bronzed oxide to a larger grained black oxide. MAGNABOND CO-300 provides the flexibility to manipulate the grain size allowing for processing a wide variety of dielectric materials while maintaining optimum inner-layer bonding.
-
Defoamer FE™
Defoamer FETM is a fully organic non-Silicone water-soluble defoamer that rinses readily and leaves no residue. It is designed for systems where clean rinsing is essential. It is odorfree and biodegradable. Defoamer FETM is ideal for defoaming developers or strippers of any type and will work at any pH.
