Magnum N-499
Magnum N-499 removes (neutralizes) the residue left on the hole walls following the permanganate desmear/etchback process. It utilizes the “peroxide” chemistry.
Download Data Sheets
Related products
-
Cupric Etching Equipment Cleaner
Provides an effective clean out of Cupric Etcher sumps along with manual removal of deposits on the etch chamber walls. CUPRIC ETCH EQUIPMENT CLEANER will dissolve Dry Film deposits built up between PM’s. CUPRIC ETCH EQUIPMENT CLEANER has a low VOC content for reduced air emissions.
-
DX™45 Plus
A one-part concentrate formulated to develop fully aqueous dry film photoresists and photoimageable solder masks. DX-45 PLUS’ highly concentrated formula is ideally suited for use in feed and bleed systems, resulting in less frequent additions than with more dilute carbonate solutions. Proprietary ingredients enhance loading, help keep equipment clean, and ensure straighter sidewalls, cleaning the foot” of underdeveloped resist. These features result in greater productivity and less down time. “” one-part concentrate formulated to develop fully aqueous dry film photoresists and photoimageable”
-
CuBrite™ PC-525
A copper plating additive for acid sulfate plating baths designed specifically for high throwing power through-hole plating of printed circuit boards. CuBrite PC-525 produces bright copper deposits that provide consistent thermal stress performance. CuBrite PC-525 is a single, clear addition agent, added on an ampere hour basis, which is used to control the brightness and physical properties of the deposit. The extreme stability of this additive greatly reduces the need for routine solution purification.
