Flo Rite™ 60
FLO RITE 60 is a unique blend of ingredients for use in a horizontal and vertical hot air leveling process. FLO RITE 60 will remove light copper oxides and lays down a protective layer of flux to protect soldermask and promote good solderability of copper pads. FLO RITE 60 will provide a bright uniform finish with good rinsability. FLO RITE 60 is a solvent free, non-foaming flux that is compatible with LPI and dry film soldermasks.
Download Data Sheets
Related products
-
Equipment Cleaner II™
Equipment Cleaner II removes water hardness, photoresist and soldermask scum and metal salt deposits from chemical processing equipment. Specifically developed for the Printed Circuit Board and Chemical Milling Industries, it will safely clean any spray equipment without damage to any metal or plastic. Equipment Cleaner II may be used at any temperature the equipment can safely handle, and may be reused until all the capacity is consumed. Equipment Cleaner II is a product that cleans: • Dry film developer residues • Dry film stripper residues • Solder stripper residues • Cleaner residues • Etcher residues (ammoniacal, or cupric) • Soldermask Developer residue • Tin Stripper Iron residue
-
LevelCote™ Cover Oil 300
LEVELCOTE COVER OIL 300 is formulated for use as a solder blanket oil for horizontal hot air leveling equipment. It prevents the formation of dross by eliminating contact of oxygen to molten solder. When used un a recirculation or oil injection system, LEVELCOTE COVER OIL 300 will lubricate pumps and internal transport mechanisms of horizontal hot air leveling equipment, reducing solder webbing.
-
Cupric Etching Equipment Cleaner
Provides an effective clean out of Cupric Etcher sumps along with manual removal of deposits on the etch chamber walls. CUPRIC ETCH EQUIPMENT CLEANER will dissolve Dry Film deposits built up between PM’s. CUPRIC ETCH EQUIPMENT CLEANER has a low VOC content for reduced air emissions.
