Circutek A-778
An acidic liquid concentrate which modifies palladium catalyzed surfaces for subsequent deposition of electroless copper. CIRCUTEK A-778produces a highly active surface for initiating rapid copper deposition while protecting the electroless copper bath from drag in contamination from the activator solution.
Download Data Sheets
Related products
-
CuBrite™ PC-525
A copper plating additive for acid sulfate plating baths designed specifically for high throwing power through-hole plating of printed circuit boards. CuBrite PC-525 produces bright copper deposits that provide consistent thermal stress performance. CuBrite PC-525 is a single, clear addition agent, added on an ampere hour basis, which is used to control the brightness and physical properties of the deposit. The extreme stability of this additive greatly reduces the need for routine solution purification.
-
DX™ Strip BAT
Provides additional antitarnish protection while removing fully aqueous liquid photoresists in spray or soak applications. DX STRIP BAT is also effective on aqueous dry film photoresists, and on a combination of liquid and dry film resists being stripped in the same process. It will generally break dry films into particles suitable for filtration. DX STRIP BAT has a low VOC content for reduced air emissions.
-
FoamFREE™ One
A silicone free, non-solvent based aqueous antifoam for primary image developers and strippers and solder mask developers. FoamFREE™ONE suppresses foaming at very low usage without leaving residue behind or in the machine. FoamFREE™ONE is for any manufacturer who needs to reduce antifoam usage to reduce process costs without the use of solvents
