Circutek CC-720
Circutek CC-720 is an acidic cleaner/conditioner for use in the electroless copper metallization process in the PCB industry. It is formulated to remove fingerprints, light soil and other contaminants from copper foil. It also conditions non-metallic surfaces such as organic resin and glass for subsequent catalyst chemisorption and electroless copper deposition.
Download Data Sheets
Related products
-
MagnaBond™ CO-300
A copper oxide process uniquely formulated to produce a variety of oxide coatings ranging from a very fine-grained bronzed oxide to a larger grained black oxide. MAGNABOND CO-300 provides the flexibility to manipulate the grain size allowing for processing a wide variety of dielectric materials while maintaining optimum inner-layer bonding.
-
LevelCote™ Flux 350
LEVELCOTE FLUX 350 is a unique blend of ingredients formulated for use in a horizontal hot air leveling process. It will remove light copper oxides and lays down a protective layer of flux to protect solder mask, and promote good solderability of copper pads. LEVELCOTE FLUX 350 will provide a bright uniform solder finish with good rinseability. LEVELCOTE FLUX 350 is non-foaming and compatible with LPI and dry film solder masks.
-
Layer Clean™ CR
An acid, non-etching cleaner that provides the most effective removal of chromate conversion coating from copper laminate. LAYER CLEAN CR also removes soils such as fingerprints and oxides. Used prior to photoresist lamination, it reduces imaging defects by improving photoresist adhesion. LAYER CLEAN CR’s non-chelating, non-chloride formula cleans and conditions copper surfaces, and provides consistent high speed cleaning at low concentrations. It is effective in both spray and soak applications.
