ADF-10 BAT
Specially formulated to remove semi-and fully aqueous dry film and screen ink resists. ADF-10 BATwill generally break dry films into very minute particles. It contains copper brightening agents for uniform, clean copper appearance. ADF-10 BATcontains additional copper brightening and antitarnish agents to preserve a bright copper surface for increased etching capability and to protect the copper surface if boards are held in a corrosive environment.
Download Data Sheets
Related products
-
ME 515L
A liquid persulfate-based copper microetch that is pre-mixed with sulfuric acid. ME 515L removes copper uniformly, providing good topography for subsequent processing. It can be used wherever a microetch is needed; prior to plating, resist lamination, solder mask over bare copper application, or solder leveling. ME 515L can be used in either soak or spray applications.
-
Aqua Flo
An organic, water soluble fusing fluid custom blended for use in tin/lead infrared fusing equipment. AQUA FLOcontains activators which clean exposed copper, providing excellent edge coverage.
-
PreLam™ Cleaner S
PreLam Cleaner is a cleaner/microetch/adhesion promoter for use on copper and other metals. It will give optimal resist adhesion both initially and during subsequent processing, where other chemicals can weaken the bond at the copper/photoresist interface. PreLam Cleaner S yields a non-traditional looking panel with a bright orange color rather than a more typical matte pink.
