Defoamer AR is a fully organic, non-silicone, water soluble defoamer that rinses readily and leaves no residue. It is effective in most aqueous and semi-aqueous systems at any pH. It is odor-free and biodegradable.
An acid, non-etching cleaner that provides the most effective removal of chromate conversion coating from copper laminate. LAYER CLEAN NP also removes soils such as fingerprints and oxides. Used prior to photoresist lamination, it reduces imaging defects by improving photoresist adhesion. LAYER CLEAN NP’s non-chelating, non-chloride, phosphate free formula cleans and conditions copper surfaces, and provides consistent high speed cleaning at low concentrations. It is effective in both spray and soak applications.
A copper plating additive for acid sulfate plating baths designed specifically for high throwing power through-hole plating of printed circuit boards. CuBrite PC-525 produces bright copper deposits that provide consistent thermal stress performance. CuBrite PC-525 is a single, clear addition agent, added on an ampere hour basis, which is used to control the brightness and physical properties of the deposit. The extreme stability of this additive greatly reduces the need for routine solution purification.
Equipment Cleaner IITM removes water hardness, photoresist and soldermask scum and metal salt deposits from chemical processing equipment. Specifically developed for the Printed Circuit Board and Chemical Milling Industries, it will safely clean any spray equipment without damage to any metal or plastic. Equipment Cleaner IITM may be used at any temperature the equipment can safely handle, and may be reused until all the capacity is consumed. Equipment Cleaner IITM is a product that cleans: • Dry film developer residues • Dry film stripper residues • Solder stripper residues • Cleaner residues • Etcher residues (ammoniacal, or cupric) • Soldermask Developer residue • Tin Stripper Iron residue