EV Screen Cleaner™
A wipe-off screen cleaner formulated to rapidly remove inks from printed circuit screens and boards without leaving a residue. EV SCREEN CLEANER has a high evaporation rate to make screens ready for use quickly and without the need for a water rinse.
Download Data Sheets
Related products
-
Layer Clean™ NP
An acid, non-etching cleaner that provides the most effective removal of chromate conversion coating from copper laminate. LAYER CLEAN NP also removes soils such as fingerprints and oxides. Used prior to photoresist lamination, it reduces imaging defects by improving photoresist adhesion. LAYER CLEAN NP’s non-chelating, non-chloride, phosphate free formula cleans and conditions copper surfaces, and provides consistent high speed cleaning at low concentrations. It is effective in both spray and soak applications.
-
Layer Clean™ CR
An acid, non-etching cleaner that provides the most effective removal of chromate conversion coating from copper laminate. LAYER CLEAN CR also removes soils such as fingerprints and oxides. Used prior to photoresist lamination, it reduces imaging defects by improving photoresist adhesion. LAYER CLEAN CR’s non-chelating, non-chloride formula cleans and conditions copper surfaces, and provides consistent high speed cleaning at low concentrations. It is effective in both spray and soak applications.
-
DX™ Strip BAT
Provides additional antitarnish protection while removing fully aqueous liquid photoresists in spray or soak applications. DX STRIP BAT is also effective on aqueous dry film photoresists, and on a combination of liquid and dry film resists being stripped in the same process. It will generally break dry films into particles suitable for filtration. DX STRIP BAT has a low VOC content for reduced air emissions.
