Circutek™ ME-515
A powdered material that is mixed with water and sulfuric acid to make a mild etch solution for copper and copper alloys. The operating solution provides a bright, clean, uniformly etched copper surface on printed circuit boards. CIRCUTEK ME-515 operating solution is specially formulated to be used in place of a sulfuric/peroxide or sodium or ammonium persulfate etching solution. It is excellent for removing tarnish and oxidation from the copper surface, and can be used prior to electroless and electrolytic plating, after tab stripping.
When used prior to electrolytic plating as part of a pattern cleaning system, CIRCUTEK ME-515 cleans and etches copper surfaces. It aids in the removal of dry film binder residues that penetrate into the copper-clad surface of printed circuit boards.
Download Data Sheets
Related products
-
Cupric Etching Equipment Cleaner
Provides an effective clean out of Cupric Etcher sumps along with manual removal of deposits on the etch chamber walls. CUPRIC ETCH EQUIPMENT CLEANER will dissolve Dry Film deposits built up between PM’s. CUPRIC ETCH EQUIPMENT CLEANER has a low VOC content for reduced air emissions.
-
Dual Strip™ BAT
Formulated to remove fully aqueous dry films and screen ink resists in soak or spray applications. DUAL STRIP will generally break dry films into particles suitable for filtration. DUAL STRIP has a low VOC content for reduced air emissions. DUAL STRIP BAT contains additional copper brightening and antitarnish agents that produce a bright, uniform copper surface for automatic optical inspection and better etching characteristics.
-
E-clean DF
An acidic, solvent-based, soluble equipment cleaner designed for use on photoresist developers and strippers. E-cleanDF is exceptionally effective on dry film resists, antifoam residues, hard water scale and carbonate residues. It effectively cleans the residues inside nozzles and pipes.
