Circutek CC-720
Circutek CC-720 is an acidic cleaner/conditioner for use in the electroless copper metallization process in the PCB industry. It is formulated to remove fingerprints, light soil and other contaminants from copper foil. It also conditions non-metallic surfaces such as organic resin and glass for subsequent catalyst chemisorption and electroless copper deposition.
Download Data Sheets
Related products
-
DX™45 Plus
A one-part concentrate formulated to develop fully aqueous dry film photoresists and photoimageable solder masks. DX-45 PLUS’ highly concentrated formula is ideally suited for use in feed and bleed systems, resulting in less frequent additions than with more dilute carbonate solutions. Proprietary ingredients enhance loading, help keep equipment clean, and ensure straighter sidewalls, cleaning the foot” of underdeveloped resist. These features result in greater productivity and less down time. “” one-part concentrate formulated to develop fully aqueous dry film photoresists and photoimageable”
-
DX™ Strip BAT
Provides additional antitarnish protection while removing fully aqueous liquid photoresists in spray or soak applications. DX STRIP BAT is also effective on aqueous dry film photoresists, and on a combination of liquid and dry film resists being stripped in the same process. It will generally break dry films into particles suitable for filtration. DX STRIP BAT has a low VOC content for reduced air emissions.
-
CuBrite™ PC-525
A copper plating additive for acid sulfate plating baths designed specifically for high throwing power through-hole plating of printed circuit boards. CuBrite PC-525 produces bright copper deposits that provide consistent thermal stress performance. CuBrite PC-525 is a single, clear addition agent, added on an ampere hour basis, which is used to control the brightness and physical properties of the deposit. The extreme stability of this additive greatly reduces the need for routine solution purification.