Rinse Aide™ 90
A completely biodegradable concentrate formulated for removing flux residues from printed circuit boards. It effectively removes both ionic and non-ionic surfactants left on fused boards. It also removes processing residues on SMOBC boards when used prior to solder mask application. RINSE AIDE 90 is effective in soak and spray applications.
Download Data Sheets
Related products
-
DPC-20 Screen Cleaner™
A safe solvent based material for the removal of uncured printing inks and solder masks. It contains no chlorinated hydrocarbons and no flammable solvents. DPC-20 SCREEN CLEANER is fast acting and has high holding capacity for economy and higher productivity.
-
CuBrite™ PC-525
A copper plating additive for acid sulfate plating baths designed specifically for high throwing power through-hole plating of printed circuit boards. CuBrite PC-525 produces bright copper deposits that provide consistent thermal stress performance. CuBrite PC-525 is a single, clear addition agent, added on an ampere hour basis, which is used to control the brightness and physical properties of the deposit. The extreme stability of this additive greatly reduces the need for routine solution purification.
-
DX™ Strip BAT
Provides additional antitarnish protection while removing fully aqueous liquid photoresists in spray or soak applications. DX STRIP BAT is also effective on aqueous dry film photoresists, and on a combination of liquid and dry film resists being stripped in the same process. It will generally break dry films into particles suitable for filtration. DX STRIP BAT has a low VOC content for reduced air emissions.
