Chemposit Sn
ChempositSnplates a dense, smooth Tin deposit onto copper alloys leaving a corrosion resistant surface that is highly solderable, even when the substrate was not. Chemposit Sndeposits remain solderable for extended periods, (to 6 months) and will not ?Tin Whisker?.Chemposit Sn Immersion Tin plating baths operate more easily and are “poisoned” less readily than other Immersion Tin plating chemistries. Chemposit Sn may be replenished to maintain key ingredients.
Download Data Sheets
Related products
-
De-Ox™ II
De-Ox II is a de-oxidizer that will remove tin, lead oxides as well as other oxides from contact surfaces minimizing resistance levels and restoring semiconductor test sockets to optimal performance. De-Ox II deoxidizes without “activating” the metal surface therefore subsequent re-growth of oxides is not altered. De-Ox II removes only oxides, and will not attack most metals, except zinc and aluminum. De-Ox II does not attack plastic surfaces in test sockets.
-
DX™ Strip BAT
Provides additional antitarnish protection while removing fully aqueous liquid photoresists in spray or soak applications. DX STRIP BAT is also effective on aqueous dry film photoresists, and on a combination of liquid and dry film resists being stripped in the same process. It will generally break dry films into particles suitable for filtration. DX STRIP BAT has a low VOC content for reduced air emissions.
-
Equipment Cleaner II™
Equipment Cleaner II removes water hardness, photoresist and soldermask scum and metal salt deposits from chemical processing equipment. Specifically developed for the Printed Circuit Board and Chemical Milling Industries, it will safely clean any spray equipment without damage to any metal or plastic. Equipment Cleaner II may be used at any temperature the equipment can safely handle, and may be reused until all the capacity is consumed. Equipment Cleaner II is a product that cleans: • Dry film developer residues • Dry film stripper residues • Solder stripper residues • Cleaner residues • Etcher residues (ammoniacal, or cupric) • Soldermask Developer residue • Tin Stripper Iron residue
