Solder Conditioner 417
An acid tin/lead cleaner designed to remove salt residues that remain after alkaline etching. The removal of these salts is essential to ensuring good fusing and a bright finished solder surface. SOLDER CONDITIONER 417is effective at eliminating re-deposition of tin on copper surfaces and allows re-etching of panels, thus minimizing rejects. Effective for both soak and spray applications. SOLDER CONDITIONER 417is an excellent pre-cleaner priorto fusing for eliminating oxides and enhancing solder edge coverage on circuits.
Download Data Sheets
Related products
-
Flo Rite™ LV
A chloride-organic acid activated flux designed for maximum performance in vertical hot air leveling machines, where a lower viscosity flux is desired for complete wetting of small holes and surface mount pads. FLO RITE LV provides excellent wetting and even coverage, resulting in a superior solder finish.
-
Magnum™ GE-600
A non-ammoniated fluoride glass etch. MAGNUM GE-600 is used to etch away the glass fiber bundles left exposed after the permanganate etchback process. It can be mixed with MAGNUM N-599 NEUTRALIZER or used as a separate step for maximum process control.
-
DX™ Strip BAT
Provides additional antitarnish protection while removing fully aqueous liquid photoresists in spray or soak applications. DX STRIP BAT is also effective on aqueous dry film photoresists, and on a combination of liquid and dry film resists being stripped in the same process. It will generally break dry films into particles suitable for filtration. DX STRIP BAT has a low VOC content for reduced air emissions.
