Circutek C-877
Circutek C-877 is used to catalyze non-metallic surfaces in the electroless copper process. Such surfaces are present in drilled holes (PTH) and include resin and glass weave surfaces that were cleaned and exposed in the desmear process steps. The chemical activity relies on the presence of colloidal palladium, which when adsorbed on non-metallic surfaces enables plating of electroless copper deposits. Circutek C-877 bath must be preceded by Circutek PD-776 to protect the delicate chemical balance of the former and assure the optimal catalyst performance.
Download Data Sheets
Related products
-
DPC-20 Screen Cleaner™
A safe solvent based material for the removal of uncured printing inks and solder masks. It contains no chlorinated hydrocarbons and no flammable solvents. DPC-20 SCREEN CLEANER is fast acting and has high holding capacity for economy and higher productivity.
-
Layer Clean™ CR
An acid, non-etching cleaner that provides the most effective removal of chromate conversion coating from copper laminate. LAYER CLEAN CR also removes soils such as fingerprints and oxides. Used prior to photoresist lamination, it reduces imaging defects by improving photoresist adhesion. LAYER CLEAN CR’s non-chelating, non-chloride formula cleans and conditions copper surfaces, and provides consistent high speed cleaning at low concentrations. It is effective in both spray and soak applications.
-
LevelCote™ Flux 350
LEVELCOTE FLUX 350 is a unique blend of ingredients formulated for use in a horizontal hot air leveling process. It will remove light copper oxides and lays down a protective layer of flux to protect solder mask, and promote good solderability of copper pads. LEVELCOTE FLUX 350 will provide a bright uniform solder finish with good rinseability. LEVELCOTE FLUX 350 is non-foaming and compatible with LPI and dry film solder masks.
