Electronics Fabrication Chemicals

 

RBP Chemical Technology supplies reliable chemistry to leading electronics manufacturers worldwide.

Chemicals for printed circuit board (PCB) fabrication, semiconductor test equipment restoration and other specialized applications.


ProductDetailsproduct_cat_hfilter
FinClean RSFinClean RS is a final finish acid cleaner designed for soak application and developed for …copper-cleaning electronics-chemicals
FinClean CRFinClean CR is a final finish acid cleaner designed for spray application and developed for …copper-cleaning electronics-chemicals
VersaCleanVersaClean is formulated to clean multiple metallic surfaces including aluminum, copper, Sn/Pb solder (HASL), Pb-free …copper-cleaning electronics-chemicals
Defoamer AR™ (RDZ-1969)Defoamer AR is a fully organic, non-silicone, water soluble defoamer that rinses readily and leaves …pcb-antifoams electronics-chemicals
Pure Isopropyl AlcoholIsopropyl Alcohol is a colorless, flammable liquid with a characteristic alcohol odor. It is completely …commodity-chemicals electronics-chemicals
MetalTreat Chelate Eliminator-8MetalTreat Chelate Eliminator-8 is an alkaline proprietary blend of waste treatment constituents. This solution offers …waste-treatment electronics-chemicals
Accuclean NFA non-foaming, acidic cleaner formulated to remove oxide and tarnish from copper surfaces.ACCUCLEAN™NFis sprayable at …copper-cleaning electronics-chemicals
Acti FloA mildly activated, water soluble flux for use prior to hot oil pot fusing. ACTI-FLOis …hot-air-leveling-hal electronics-chemicals
Acidified PumiceACIDIFIED PUMICEis a uniform blend of fine pumice and citric acid, ideally suited for micro-roughening …commodity-chemicals electronics-chemicals
291 FluxA mildly activated flux for use prior to hot oil fusing. 291 FLUXis formulated without …hot-air-leveling-hal electronics-chemicals
ADF-25CA highly concentrated product formulated to remove today’s newest dry film resists in soak or …outer-layer-resist-strippers electronics-chemicals
ADF-14 BATA fully aqueous photoresist stripper with an additive that significantly reduces the attack on tin, …outer-layer-resist-strippers electronics-chemicals
ADC-40A one-part concentrate (40% potassium carbonate) formulated to develop fully aqueous dry film photoresist. It …developers electronics-chemicals
Chemposit SnChempositSnplates a dense, smooth Tin deposit onto copper alloys leaving a corrosion resistant surface that …final-finishes electronics-chemicals
Board Brite IIBOARD BRITE IIis an acid cleaner for cleaning and conditioning tin/lead plated board surfaces. It …hot-air-leveling-hal electronics-chemicals
AT-2000An oxidation inhibitor concentrate which is added to water to prevent tarnishing of copper and …antitarnish electronics-chemicals
ADF-72A photoresist stripper formulated to remove a wide variety of fully aqueous photo resists in …outer-layer-resist-strippers electronics-chemicals photoresist-strippers
Circutek CC-710An alkaline solution to prepare and condition printed circuit boards for through-hole metallization. CIRCUTEK CC-710is …electronics-chemicals pth-metalization
Circutek A-778An acidic liquid concentrate which modifies palladium catalyzed surfaces for subsequent deposition of electroless copper. …electronics-chemicals pth-metalization
Circutek PC-701A high speed, electroless copper process which is capable of depositing 80 -100 millionths of …electronics-chemicals pth-metalization
Cubrite CF-110A matte acid copper plating additive formulated for plating baths with high throwing power resulting …plating electronics-chemicals
Copper Sulfate SolutionRBP?s COPPER SULFATE SOLUTIONis manufactured using only sulfuric acid and pure copper metal. No recycled …commodity-chemicals electronics-chemicals
CitrisumpAn acidic equipment cleaner designed for use in developers and resist strippers. CITRISUMPis exceptionally effective …equipment-cleaners electronics-chemicals
Circutek PD-776Pre-dip solution used in conjunction with CIRCUTEK C-777activator in catalyzing the substrate for subsequent electroless …electronics-chemicals pth-metalization
Circutek PC-801A high speed, electroless copper process which is capable of depositing 80 -100 millionths of …electronics-chemicals pth-metalization
Hydrochloric Acid 20 Becommodity-chemicals inner-layer-etching electronics-chemicals
Equipment Cleaner IVEquipmentCleaner IV removes water hardness, photoresist scum and metal salt deposits from chemical processing equipment. …equipment-cleaners electronics-chemicals
Magnastrip 600HFAn alkaline liquid designed to remove cured liquid photoimageable solder masks from halogen free laminates. …electronics-chemicals specialty-products
Metaltreat 529A heavy metal precipitant used to remove metals from wastewater streams. METALTREAT 529is particularly useful …waste-treatment electronics-chemicals
Metaltreat 528 CoagulantMETALTREATTM528 COAGULANTis a precipitant formulated for removal of various free, complexed and chelated metals from …waste-treatment electronics-chemicals
Metaltreat 513A heavy metal precipitant used to remove metals from wastewater streams. METALTREAT 513 is particularly …waste-treatment electronics-chemicals
Metaltreat 510A heavy metal precipitant used to remove metals from wastewater streams. METALTREAT 510is particularly useful …waste-treatment electronics-chemicals
Metaltreat 4007When used as a primary coagulantMETALTREAT 4007 is more effective in reducing sludgevolume than applying …waste-treatment electronics-chemicals
Metaltreat AF 13-10METALTREAT AF13-10is asilicone based emulsion used primarily in aqueous waste treatment systems where quick knockdown …waste-treatment electronics-chemicals
Metaltreat 958 FlocculantMETALTREATTM958 FLOCCULANTis a unique highcharge, ultra high molecular weight cationic flocculant. This product is designed …waste-treatment electronics-chemicals
Metaltreat 957METALTREAT 957is an anionic polymer in emulsion form. METALTREAT 957has been found effective as an …waste-treatment electronics-chemicals
Metaltreat 530A highly concentrated, deodorized, polysulfide based liquid blend. METALTREAT 530 is designed to form a …waste-treatment electronics-chemicals
Posiclean™ MRAn acid soak cleaner that removes oxidation, tarnish and organic soils from copper surfaces. POSICLEAN™MRis …copper-cleaning electronics-chemicals
Solder Conditioner 417An acid tin/lead cleaner designed to remove salt residues that remain after alkaline etching. The …hot-air-leveling-hal electronics-chemicals
Screen Wash LoScreen Wash LO is a custom formulated blend of aromatic and oxygenated solvents with high …electronics-chemicals specialty-products
Screensol ER-250SCREENSOL ER-250 is designed to remove emulsion and residue from printed circuit board imaging screens. …electronics-chemicals specialty-products
Resist Treat 5000RESIST TREAT 5000is a calcium chloride based coagulant/precipitant designed to promote dissolution and separation of …electronics-chemicals waste-treatment
Tidy SumpA liquid concentrate designed to clean and condition developing and resist stripping machines, and other …equipment-cleaners electronics-chemicals
Sulfuric Acid 93% PC Gradecommodity-chemicals electronics-chemicals
LDI Strip 77LDI Strip 77 is a semi-aqueous photoresist stripper formulated for stripping very fine line circuit …outer-layer-resist-strippers electronics-chemicals
OnyxGraphite Based Direct Metallization for Printed Circuit Boards. Onyx is a process in which a …electronics-chemicals pth-metalization
ADF-55Formulated to remove fully aqueous dry films and liquid resists in soak or spray applications. …electronics-chemicals photoresist-strippers
Sump ProA non-chelating, acidic equipment cleaner designed for use in developers and resist strippers. SUMP PRO …equipment-cleaners electronics-chemicals
AT-3000AT-3000 is a concentrated antitarnish compound which prevents tarnishing of copper and copper alloys. It …antitarnish electronics-chemicals
Circutek™ ME-515A powdered material that is mixed with water and sulfuric acid to make a mild …copper-cleaning electronics-chemicals pth-metalization
MagnaStrip™ 500An alkaline liquid designed to remove fully cured liquid photoimageable acrylic solder masks from printed …electronics-chemicals specialty-products
M-Strip™Formulated to provide the ultimate in speed for automated tab plating machines while maintaining excellent …electronics-chemicals solder-tin-stripping
CuBrite™ PC-520An additive containing the carrier component of the brightener system for CuBrite PC-525 copper plating …plating electronics-chemicals
Magnum™ NPS-220 and Magnum™ NPS-240An economical two-step solder stripper that rapidly strips tin/lead or tin deposits from printed circuit …electronics-chemicals solder-tin-stripping
Select Strip™ PlusA unique, fast-acting, single step, peroxide based stripper for tin/lead or tin. It has a …solder-tin-stripping electronics-chemicals
Thermo Flo™A synthetic, water soluble fusing fluid that has been custom blended for tin/lead fusing and …hot-air-leveling-hal electronics-chemicals
De-Ox™De-Ox is a de-oxidizer that will remove tin, lead oxides as well as other oxides …electronics-chemicals semiconductor-restorer
De-Ox™ IIDe-Ox II is a de-oxidizer that will remove tin, lead oxides as well as other …electronics-chemicals semiconductor-restorer
De-Ox™ UltraDe-Ox Ultra is a de-oxidizer that will remove tin, lead oxides as well as other …electronics-chemicals semiconductor-restorer
ProbeWash™ProbeWash is a de-oxidizer that will remove aluminum contaminants and other oxides from contact surfaces. …electronics-chemicals semiconductor-restorer
Ultraclean™ NFFormulated to remove dirt, oil, fingerprints and other soils from copper surfaces without etching the …copper-cleaning lamination electronics-chemicals
Special Film CleanerA pleasant smelling, hexane free film cleaner that removes grease and other soil marks from …electronics-chemicals specialty-products
Sump Doctor™A liquid concentrate designed to clean and condition resist developing and Resist Stripper machines. It …equipment-cleaners electronics-chemicals
TidyLine™ EQ-100A concentrated alkaline equipment cleaner designed to clean conveyorized processing equipment. TIDYLINE EQ-100 effectively removes …equipment-cleaners electronics-chemicals
TinPlate™ PC-625TinPlate PC-625 is an organic grain refiner that is used to aid in the electroplating …plating electronics-chemicals
PrepBond™An alkaline cleaner for use in the LAYERBOND 2000 adhesion promoter process. PREPBOND provides complete …copper-cleaning lamination electronics-chemicals
Quantum Etch™A stabilized peroxide product for use with sulfuric acid to form a peroxide/sulfuric microetch. QUANTUM …lamination electronics-chemicals
Quench Aide™ 96For use following hot air leveling or fusing. QUENCH AIDE 96 reduces the temperature of …hot-air-leveling-hal electronics-chemicals
Rinse Aide™ 90A completely biodegradable concentrate formulated for removing flux residues from printed circuit boards. It effectively …hot-air-leveling-hal electronics-chemicals
Rinse Aide™ 95Formulated for removing insoluble flux residues and ionic contaminants from printed circuit boards following leveling …hot-air-leveling-hal electronics-chemicals
Screensol™ SC-55An economical, solvent based screen wash formulated to remove solvent processible inks from printed circuits …electronics-chemicals specialty-products
Screensol™ SC-560NAn economical, non-flammable screen wash formulated to remove solvent processible inks from printed circuits screens …electronics-chemicals specialty-products
Semicon Resist StripA highly concentrated product formulated to remove today’s newest dry film resists in soak or …electronics-chemicals specialty-products
Sodium Chlorate 46%Liquid Solution for Etch Regeneration.inner-layer-etching electronics-chemicals
Posiclean™ MAn acid soak cleaner that removes oxidation, tarnish and organic soils from copper surfaces. POSICLEAN …copper-cleaning electronics-chemicals
MicroStrip™ 2000A semi-aqueous photoresist stripper for stripping very fine line circuit boards. MICROSTRIP 2000 contains additives …outer-layer-resist-strippers electronics-chemicals
Microstrip™ONEA fully aqueous based resist stripper designed to remove the most tenacious resists. Microstrip ONE …outer-layer-resist-strippers electronics-chemicals
NPS™ 3000A nitric acid based solution for stripping tin or tin/lead from printed circuit boards. NPS …electronics-chemicals solder-tin-stripping
NPS™ 3001A nitric acid based solution for stripping tin or tin/lead from printed circuit boards. NPS …electronics-chemicals solder-tin-stripping
NPS™ 3002A concentrated nitric acid based tin stripper with exceptional loading capacity, high strip speed, and …electronics-chemicals solder-tin-stripping
NPS™10 & 20A two step, high capacity alternative to peroxide tin/lead stripping. It is especially formulated for …electronics-chemicals solder-tin-stripping
MagnaBond™ CO-300A copper oxide process uniquely formulated to produce a variety of oxide coatings ranging from …lamination electronics-chemicals
MagnaBond™ OxAltMAGNABOND OxAlt is a three-part micro-etch additive designed to promote mechanical copper-epoxy bonding by optimizing …lamination electronics-chemicals
Magnum™ GE-600A non-ammoniated fluoride glass etch. MAGNUM GE-600 is used to etch away the glass fiber …electronics-chemicals pth-desmear
Magnum™ K-401 OxidizerA potassium permanganate-based desmear system designed to efficiently remove sensitized resinous material from the hole …electronics-chemicals pth-desmear
Magnum™ N-501 OxidizerA sodium permanganate based desmear/etchback system designed to efficiently remove sensitized resinous material from the …electronics-chemicals pth-desmear
Magnum™ N-599A neutralizer for oxidizer residue left on the hole wall following the permanganate desmear/etchback process. …electronics-chemicals pth-desmear
Magnum™ S-400The first part of a three step process for multilayer hole preparation. MAGNUM S-400 is …electronics-chemicals pth-desmear
Magnum™ S-450MAGNUM S-450 is used to condition holes after drilling and before the desmear step in …electronics-chemicals pth-desmear
MaskStrip™MaskStrip is designed to remove uncured UV and thermal solder mask from printed circuit boards …electronics-chemicals specialty-products
LevelCote™ Cover Oil 300LEVELCOTE COVER OIL 300 is formulated for use as a solder blanket oil for horizontal …hot-air-leveling-hal electronics-chemicals
LevelCote™ Flux 350LEVELCOTE FLUX 350 is a unique blend of ingredients formulated for use in a horizontal …hot-air-leveling-hal electronics-chemicals
Layer Clean™ CRAn acid, non-etching cleaner that provides the most effective removal of chromate conversion coating from …copper-cleaning electronics-chemicals
Layer Clean™ NPAn acid, non-etching cleaner that provides the most effective removal of chromate conversion coating from …copper-cleaning electronics-chemicals
Flo Rite™ 60FLO RITE 60 is a unique blend of ingredients for use in a horizontal and …hot-air-leveling-hal electronics-chemicals
Flo Rite™ LVA chloride-organic acid activated flux designed for maximum performance in vertical hot air leveling machines, …hot-air-leveling-hal electronics-chemicals
FoamFREE™ 940A highly effective foam suppressant for aqueous developing and stripping of DuPont™ RISTON® photopolymer films. …pcb-antifoams electronics-chemicals
FoamFREE™ OneA silicone free, non-solvent based aqueous antifoam for primary image developers and strippers and solder …pcb-antifoams electronics-chemicals
DPC-20 Screen Cleaner™A safe solvent based material for the removal of uncured printing inks and solder masks. …electronics-chemicals specialty-products
Dual Strip™ BATFormulated to remove fully aqueous dry films and screen ink resists in soak or spray …electronics-chemicals photoresist-strippers
DX™ Strip BATProvides additional antitarnish protection while removing fully aqueous liquid photoresists in spray or soak applications. …electronics-chemicals photoresist-strippers
DX™45 HWA liquid 45% potassium carbonate concentrate formulated to develop fully aqueous dry film photoresists and …developers electronics-chemicals
DX™45 NHA liquid 45% potassium carbonate concentrate formulated to develop fully aqueous dry film photoresists and …developers electronics-chemicals
DX™45 PlusA one-part concentrate formulated to develop fully aqueous dry film photoresists and photoimageable solder masks. …developers electronics-chemicals
E-clean DFAn acidic, solvent-based, soluble equipment cleaner designed for use on photoresist developers and strippers. E-cleanDF …equipment-cleaners electronics-chemicals
Equipment Cleaner II™Equipment Cleaner II removes water hardness, photoresist and soldermask scum and metal salt deposits from …equipment-cleaners electronics-chemicals
EV Screen Cleaner™A wipe-off screen cleaner formulated to rapidly remove inks from printed circuit screens and boards …electronics-chemicals specialty-products
CuBrite™ PC-525A copper plating additive for acid sulfate plating baths designed specifically for high throwing power …plating electronics-chemicals
Cupric Etching Equipment CleanerProvides an effective clean out of Cupric Etcher sumps along with manual removal of deposits …equipment-cleaners electronics-chemicals
Defoamer FE™Defoamer FETM is a fully organic non-Silicone water-soluble defoamer that rinses readily and leaves no …pcb-antifoams electronics-chemicals
AntiFoam BB ™A blended organic defoaming surfactant for use in reducing foam generated in spray equipment. ANTIFOAM …antifoams pcb-antifoams press-additives pressroom-chemicals electronics-chemicals